Scrape and Rolling Machines

Scrape and Rolling Machines

Send Inquiry

We are manufacturing and supplying a board array of best quality Scrape And Rolling Machines. The offered machines are manufactured using the best quality components and sophisticated techniques under the guidance of our experienced professionals. These machines are extensively used in various industries for rolling scrap metal sheets. In addition to this, our valued clients can avail these Scrape And Rolling Machines in different technical specifications at reasonable prices.


  • Low power consumption
  • Excellent performance
  • Sturdy design
  • Efficient working


Main Specifications:

model TZK25(1-8m TZK36(1-8m
the range of boring diameter 80-250mm 100-360mm
the range of borning depth 500-8000mm 500-8000mm
the width of the machine guide way 600mm 600mm
the height of center(from the guide way to center of spindle) 400mm 500mm
range of feeding speed 10-3500mm/min  step less 10-3500mm/min step less
the main motor of boring box N=60kW SIEMENS AC spindle motor N=113kW SIEMENS AC spindle moto
range of drill box spindle 60-1200r/min two grade stepless 150-800r/min three grade stepless
the workpiece clamped diameter 100-350mm 120-420mm
feeding motor N=7.75kW,AC servo motor N=7.75kW,AC servo motor
CNC system SIEMENS 802 SIEMENS 840
hydraulic pump motor N=2.2kW n=1440r/min N=2.2kW n=1440r/min
cooling pump motor N=7.5kW n=1440r/min two group,one group is controlled by frequency conversion N=11kW n=1440r/min two group,one group is controlled by frequency conversion
the rated pressure of cooling system 0.6Mpa 0.6Mpa
the motor of extract pump N=11kW n=1440r/min two group N=11kW n=1440r/min two group
the flow of cooling system 100-800L/min  two group,one group is controlled by frequency conversion 100-1200L/min  two group,one group is controlled by frequency conversion


The other optional

(1) workpiece rotate:

the rotate speed of workpiece 30r/min 30r/min
the clamped range of workpiece 80-300mm(optional) 120-420mm(optional)
the clamped range of pneumatic chuck 80--300mm 120-420mm
the pressure of pneumatic chuck 0.6MPa 0.6MPa
the motor power 22kW 30kW

(2) The push boring - pull roll group and tool can be used for precision cold-drawn tube or hot rolling tube processing after rough boring.machining diameter margin is less than 1.5mm. Recommend use South Koream imports cutting tool.

3m Normally, it is below 3m by boring-scraping-rolling processing.